cci 50 bmg primers 35
Country of Origin
United States of America
Firing pin retraction springs are uncommon on military-style semi-automatic rifles, however. A “slam-fire” can occur before the bolt is locked if care is not taken in assembling ammunition. Various methods and components are employed by military arsenals to achieve this goal. Various primer sensitivity specifications, for example. because of their commercial rivals. A slam-fire is less likely with CCI’s commercially available rifle primers, which are designed to meet military sensitivity specifications. The CCI is an abbreviation for theMilitary primers are ideal for reloading military semi-automatics. cci 50
cci 50 bmg primers 35
BRISANCE | cci 50 bmg primers 35
Special primers alone are not enough to prevent slam-fires. The slam-fire potential of a cartridge can be affected by a variety of factors, including headspace, chamber condition, firing pin shape and protrusion, bolt velocity, and the state of the cartridge case. Military-grade sensitivity. Mix for ball/spherical propellant initiators. CCI Magnum primers can be used in the same way.
CCI 50 BMG Military Primers
In technical jargon, primers are classified by their “brisance,” which is defined as the “shattering effect of a high explosive.”
Fired primer cup brisance depends heavily on the flame that leaps from the flash hole after the firing pin smacks it.
Slow-burning powder is needed for large rifle cases like Weatherbys and Remington Ultra Mags, as well as older British African cartridges. To ignite slower-burning powders, you’ll need a longer-lasting flame with a larger diameter, which is easier to achieve during cooler weather. The Federal 215 was created specifically for this purpose as the first “magnum” primer. According to many, CCI and Winchester magnum rifle primers are just as hot as the 215 for hand-loaders, if not hotter. cci 50 bmg primers 35
When it comes to powder combustion, granule size is just one factor to consider, but other factors, such as the amount of surface area on the granule, also play a role. Granule size is the primary factor in controlling the burning rate of extruded powders like 4895’s small grains or H-4831’s large grains. In order to control the burning rate of ball powder, the exterior coatings must be relatively flame-resistant. These coatings, by definition, make ball powders more difficult to ignite. cci 50 bmg primers 35
Product Overview | cci 50 bmg primers 35
Our Mil-Spec No. 35/50 Cal BMG primer provides the most reliable, consistent ignition. It’s built to military specifications and specifically designed for use in 50 BMG.
- Specifically designed for loading 50 BMG
- Built to military specifications
- Provides extremely reliable, consistent ignition
|Type||50 Caliber BMG|
|Bullet Style||50-caliber BMG|